Reset Limits.ponder only if search continue, but if
we are going to stop the search there is no need
(and is also confusing) to clear the 'ponder' flag.
This mimics the behaviour upon rceiving 'stop' when
pondering.
No functional change.
Don't wait for the search to finish after a 'stop'
command, but keep processing the GUI input if any.
Also explicitly wake up the main thread (that could be
sleeping) after a 'stop' or 'quit' command and do not
rely on wait_for_search_finished() doing it for us.
This patch cleans up the code and functions's definitions,
but it is risky and needs a good test under different
conditions to be sure it does not introduces hungs up.
No functional change.
Following a user request I added the handling of UCI:
go mate x
Currently we just return from a PV node if x moves have been
done. Probably not the best approach. I have looked at Fruit/Toga
sources and there is even simpler: engine falls back on a fixed
depth search.
No functional change.
Let the caller to decide where to redirect (cout or cerr) the
ASCII representation of the position. Rename the function to
reflect this.
Renamed also from_fen() and to_fen() to set() and fen() respectively.
No functional change.
Before the search we setup the starting position doing all the
moves (sent by GUI) from start position to the position just
before to start searching.
To do this we use a set of StateInfo records used by each
do_move() call. These records shall be kept valid during all
the search because repetition draw detection uses them to back
track all the earlier positions keys. The problem is that, while
searching, the GUI could send another 'position' command, this
calls set_position() that clears the states! Of course a crash
follows shortly.
Before searching all the relevant parameters are copied in
start_searching() just for this reason: to fully detach data
accessed during the search from the UCI protocol handling.
So the natural solution would be to copy also the setup states.
Unfortunatly this approach does not work because StateInfo
contains a pointer to the previous record, so naively copying and
then freeing the original memory leads to a crash.
That's why we use two std::auto_ptr (one belonging to UCI and another
to Search) to safely transfer ownership of the StateInfo records to
the search, after we have setup the root position.
As a nice side-effect all the possible memory leaks are magically
sorted out for us by std::auto_ptr semantic.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
And group there all the formatting functions but
uci_pv() that requires access to search.cpp variables.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
It seems the standard behaviour as implemented
in most engines although UCI protocol does not
specify what to do upon "ucinewgame" command.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Now that we can call bench on current position
we can directly use it to perform our perft.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Now that we can call bench from command prompt
has a sense to teach bench to run the current
set position. To do this is enough to call bench
with 'current' as fen source parameter.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Unfortunatly accessing thread local variable
is much slower than object data (see previous
patch log msg), so we have to revert to old code
to avoid speed regression.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
But use the newly introduced local storage
for this. A good code semplification and also
the correct way to go.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
A std::set (that is a rb_tree) seems really
overkill to store at most a handful of moves
and nothing in the common case.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
It is possible to start with 'stockfish', then from
command prompt type 'bench' and SF will do what you expect.
Old behaviour is anyhow preserved. As a bonus we can now
start from command line any UCI command understood by
Stockfish. The difference is that after execution of a
command from arguments SF quits, while at the end of the
same command from prompt SF stays in UCI loop.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
We need to wake up main thread if it is sleeping
waiting for stop or ponderhit, so we cannot skip
calling wait_for_search_finished().
Found by Othello1984.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
There is no need to "invent" different names
from the original UCI parameters.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
When quitting we should avoid RootPosition to be
destroyed while threads are still running, leading
to a crash. In case of a "stop" or "ponderhit"
command there is no need for the UI thread to wait.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
UCI protocol it is not clear about what the engine
should be supposed to do when "ucinewgame" is
received. Stockfish simply sets the position to
start FEN, but it is redundant becuase the GUI always
resends the position after "ucinewgame" command, so
it seems we can safely ignore that command.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
So to be done only once at startup and in the (unlikely)
cases that a relevant UCI parameter is changed, instead
of doing it at the beginning of each search.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Introduce and use a new Time class designed after
QTime, from Qt framework. Should be a more clear and
self documented code.
As an added benefit we now use 64 bits internally to get
millisecs from system time. This avoids to wrap around
to 0 every 2^32 milliseconds, which is 49.71 days.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
We just need to verify if a legal move is among the
SearchMoves, so we don't need a vector for this.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Currently after a 'quit' command UI thread raises stop
signal, exits from uci_loop() and calls Threads.exit()
while the search threads are still active.
In Threads.exit() main thread is asked to terminate, but
if it is parked in idle_loop() it will exit and free its
resources (in particular the shared Movepicker object) while
sibling slaves are still active and this leads to a crash.
The fix is to let the UI thread always wait for main thread
to finish the search before to return from uci_loop().
Found by Valgrind when running with 8 threads.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Greatly improves the usage. User defined conversions
are a novelity for SF, another amazing C++ facility
at work !
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Make a better use of C++ operators overloading to
streamline the APIs.
Also sync polyglot.ini file while there.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Follow the suggested Qt style:
http://doc.qt.nokia.com/qq/qq13-apis.html
It seems to me simpler and easier to read.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Diretcly use the underlying std::vector<Move> and the
STL algorithms. Also a bit of cleanup while there.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Detach from the UI thread the input arguments used by
the search threads so that the UI thread is able to receive
and process any command sent by the GUI while other threads
keep searching.
With this patch there is no more need to block the UI
thread after a "stop", so it is a more reliable and
robust solution than the previous patch.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Unfortunatly xboard sends immediately the new position to
search after sending "stop" when we have a ponder miss.
Becuase main thread position is not copied but is referenced
directly from root position and the latter is modified by
the "position.." UCI command we end up with the working position
that changes under our feet while the search is still recovering
after the "stop" and this causes a crash.
This happens only with the (broken) xboard, native UCI does not
have this problem.
Reported by otello1984
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Fixes an hang when playing with ponder ON. Perhaps there is still
a very small race but now it seems engine does not hang anymore.
No functional change.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
